BONDTITE AQUASHIELD is a specialized polymer-based wood coating designed for protecting plywood or wooden surfaces against water seepage and dampness causing damage to furniture.
Used to resist effect of moisture, seepage and humid areas
Cost saving
Eco-friendly
Saves time
Bondtite Aquashield can be used for application over backsides of wardrobes, shelves, cupboards and furniture surfaces which may expose to direct contact with walls.
Step 1 : Remove dust , dirt, oil and grease etc. present on the plywood surface .
Step 2 : Stir material thoroughly before each use.
Step 3 : Apply 1 st coat of Bondtite Aquashield using brush or roller on whole plywood surface evenly and leave it for 10-15 minutes to dry.
Step 4 : Apply 2 nd coat over 1st coat similarly as done earlier.
Step 5 : For highly porous surface 3rd coat can be applied .
Step 6 : After application is completed , clean the brush and other tools with normal water.
Imparts waterproof property
DIY application
No odour
Ready-to-use
Benzene-free
Shelf Life: Up to 1 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Easy to apply
Increases furniture lifespan
Protects against seepage
