BONDTITE HYDRA+ is a single-component premium white PVA emulsion adhesive with fast-setting and superior waterproof properties. It is a specially designed woodworking adhesive with anti-bubble, cross-linked technology to avoid debonding arising due to changes in weather conditions and promote faster-setting propoerties.
Bondtite Hydra+ is suitable for woodworking in furniture for kitchen, balconies, bathroom, etc. where water exposure is high. It is usable for bonding all types of woodworking like plywood, wood, laminates, veneers, particle boards, block board/hard board, MDF with each other.
Step 1 : Clean both the surfaces to be bonded.
Step 2 : It is ready to use product so dilution is not recommended.
Step 3 : Apply an even coat of Bondtite Hydra+ first on comparatively non-porous surfaces and then on porous surfaces, e.g. apply first on laminate and then on Plywood.
Step 4 : Depending on surrounding climatic conditions of temperature and humidity , give suitable open time
Step 5 : Till the glue is wet on both the substatrets ,press those two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support etc., till the adhesive dries completely.
Step 6 : Excess adhesive pressed outside the joints should be wiped out with a wet cloth.
Anti-bubble crosslinked technology
Fast-setting
Confirms EN204 to category D3
Superior spread ability
Shelf Life: Up to 1.5 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Anti-Bubble Crosslinked Technology
Formaldehyde Free
