BONDTITE MULTIBOND SR is a synthetic rubber-based contact adhesive suitable for general purpose bonding with variety of substrates such as rubber, leather, EVA, rexin, footwear, canvas, galvanised metal sheets, PVC flooring and upholstery foam. Also used for AC unit & duct insulation applications.
Usable for HVAC applications, PVC flooring and upholstery foam
Safe for users - non-carcinogenic
Low labour cost
Exteded workability
Carpet & PVC flooring
AC ducting
Leather articles including footwear
Mattress and upholstery
Step 1 : Surface preparation: Ensure that substrates to be bonded are clean, dry and free from oil, grease and foreign particles such as dust and rust.
Step 2 : Stir adhesive well and make it homogeneous prior to use.
Step 3 : Apply adhesive uniformly in thin layer on both the substrates to be bonded with brush, spatula or any suitable tool.
Step 4 : Allow evaporation of solvents from adhesive layer to develop tack.
Step 5 : The evaporation of solvent may take 5 to 10 minutes depending upon ambient temperature and humidity.
Step 6 : Assemble both the substrates with uniform contact pressure to achieve intimate contact without air pockets. The optimum bond strength is achieved after 24 hours.
Multi-purpose
Benzene-free
Quick bonding and drying
Higher tack retention
Shelf Life: Up to 1.5 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Easy to apply
SMOOTH SPREADABILITY
