SOLVOBOND CPVC 707 is a yellow-coloured medium-bodied CPVC solvent cement for joining CPVC pipes and fittings. It is recommended for potable water piping as well as pressurized pipes. It can withstand temperature upto 82°C.
Step 2 : Remove burr, roughen and clean the outer surface of the pipe and inner surface of the socket
Step 3 : Check the dry fit of pipe & fitting. It should go up to end of the fitting easily.
Step 4 : Apply Solvobond CPVC 707 evenly using suitable applicator on outer surface of the pipe and inner surface of the socket.
Step 5 : Wipe off excess cement.
Step 6 : Partially emptied container should be close immediately.
Step 7 : Allow 2 min to get good handling strength. 1 hr for cold water system upto 160 psi, 6 hr for hot water system upto 100 psi @82°C. For pipe size 1.5” (50 mm) or larger, higher temperature & pressure longer cure time is require.
Low VOC
Higher brust strength
Meets ASTM F-493 Standards
Shelf Life: 2 years for tin container and 4 years for Coex pack from date of manufacture (Storage Temp 2-40°C) for
Storage: Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
High-pressure Resistance
Ideal for Hot-water Plumbing
Resists Algal & Bacterial Growth
Temperature resistance up to 82˚C
