SOLVOBOND PVC 501 is a regular-bodied PVC solvent cement suitable for PVC pipes and fittings upto 2” diameter. It is also suitable for electrical conduit pipe.
Suitable for borewell fittings, joining electrical conduit, drainage, agricultures and in irrigation piping
Step 1 : Cut the pipe
Step 2 : Remove burr, roughen and clean the outer surface of the pipe and inner surface of the socket
Step 3 : Check the dry fit of pipe & fitting. It should go up to end of the fitting easily.
Step 4 : Apply first coat of Solvobond uPVC 606 evenly using suitable applicator on outer surface of the pipe and inner surface of the socket. Again apply second coat on pipe.
Step 5 : Twist the pipe 45°-90° while inserting into the socket for better spreading of Solvobond PVC 501 and hold for 30 sec.
Step 6 : Do not move joint for 10 minutes
Step 7 : Partially emptied container should be close immediately.
Low VOC
Meets ASTM D 2564 Standards
Higher brust strength
Shelf Life: 2 years for tin container and 4 years for Coex pack from date of manufacture (Storage Temp 2-40°C) for
Storage: Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
High-pressure Resistance
Low Viscosity & High Coverage
Low VOC & Eco-friendly
Meets ASTM D 2564 Standards
