BONDSET 2IN1 is a hand kneadable, epoxy putty gives in concentric rolls hardener that mixes in one minute to provide fast repairs to multiple surfaces.
Suitable for reparing in autombile, civil, electrical, foundries, industries as well as household applications
Step 1 : The surface should be free from dust, rust, oil, paint, varnish, moisture etc. Emery paper or grinder can be used to abrade the surface for better binding. Acetone, petrol, kerosene oil can be used to free the surface from grease/oil
Step 2 : Twist or cut off required amounts, then knead it with fingers to achieve a uniform color. If mixing is difficult, warm the putty to room temperature or slightly above. Apply to surface to be repaired within 2 minutes of mixing. Force into any cracks or holes to be filled and strike off the excess material, preferably with a tool that’s made moist using clean water.
Step 3 : When applying to a damp or wet leaking area, work the material forcefully and apply pressure until adhesion begins to take effect. For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening. Remove excess material before hardening begins.
Step 4 : After 5-10 minutes the epoxy will begin to form a tenacious bond. After just 60 mins, Bondset Sanitary Under Water can be drilled, sawed, carved, sanded, stained or painted
Low shrinkage
Paintable
Good compressive strength
Shelf Life: 12 months from date of manufacturing
Storage: Product should be stored be stored below 40°C in a cool and dry place away from sunlight in properly tight container.
Bonds even at low temperatures
Colourless & Transparent Bond Line
More productivity due to 5-min setting time
Thicker Formula for vertical applications