Sealing overhead tanks, wash-basins, metal buckets, etc.
Fixing window glass on aluminium frame and nails on wall
Repairing corroded parts of air conditioners, freezers, radiators, etc.
Repairing of kitchen appliances
Step 1 : The surface should be free from dust, rust, oil, paint, varnish, moisture etc. Emery paper or grinder can be used to abrade the surface for better binding. Acetone, petrol, kerosene oil can be used to free the surface from grease/oil.
Step 2 : Twist or cut off required amounts, knead with fingers until it has a uniform color. If mixing is difficult, warm the putty to room temperature or slightly above. Apply to surface to be repaired within 2 minutes of mixing. Force into any cracks or holes to be filled and strike off the excess material, preferably with a tool wetted with clean water.
Step 3 : When applying to a damp or wet leaking area, work the material forcefully and apply the pressure until adhesion begins to take effect. For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening.
Step 4 : Remove excess material before hardening begins. After 5-10 minutes the epoxy will begin to form a tenacious bond. After just 60 mins, Bondset Fast Setting can be drilled, sawed, carved, sanded, stained or painted.
Soft and pliable
Fast-setting
Good compressive strength
Multi-substrate adhesion
Bondset Fast Setting Epoxy Putty is a hand-kneadable, two-component epoxy putty used for filling, sealing and repairing a variety of surfaces.
Bondset Fast Setting Epoxy Putty can be applied to metal, ceramic and other surfaces commonly found on tanks, basins and household equipment.
Clean the surface of dust, rust, oil and moisture, knead the putty with your fingers until uniform in colour, apply within 2 minutes of mixing, and strike off excess material with a water-moistened tool.
Bondset Fast Setting Epoxy Putty begins forming a tenacious bond within 5-10 minutes, and after 60 minutes it can be drilled, sawed, carved, sanded, stained or painted.
Bondset Fast Setting Epoxy Putty is commonly used for sealing overhead tanks, wash basins and metal buckets, fixing window glass on aluminium frames, and repairing corroded parts of air conditioners, freezers and radiators.
Bondset Fast Setting Epoxy Putty is suitable for stopping water leaks and repairing fuel tanks, indicating good resistance to moisture once cured.
Surfaces with dust, rust, oil, paint or moisture should be properly cleaned and abraded first, as Bondset Fast Setting Epoxy Putty needs a prepared surface to bond well.
Avoid applying the putty more than 2 minutes after mixing, skipping surface preparation, or disturbing the repair before the initial 5-10 minute bonding period.
Bondset Fast Setting Epoxy Putty is hand-kneadable and sets fast enough for emergency leak-stopping repairs that liquid adhesives cannot match for speed and gap-filling.
Store Bondset Fast Setting Epoxy Putty in a dry place in its original, properly closed packaging away from heat and moisture.
Shelf Life: 12 months from date of manufacturing
Storage: Product should be stored be stored below 40°C in a cool and dry place away from sunlight in properly tight container.
Biocompatible and safe for use
Fast-setting
Resistance to acid & fungus
Sealing repairing & fixing applications
