Step 1 : The surface should be free from dust, rust, oil, paint, varnish, moisture etc. Emery paper or grinder can be used to abrade the surface for better binding. Acetone, petrol, kerosene oil can be used to free the surface from grease/oil
Step 2 : Twist or cut off required amounts, then knead it with fingers to achieve a uniform color. If mixing is difficult, warm the putty to room temperature or slightly above. Apply to surface to be repaired within 2 minutes of mixing. Force into any cracks or holes to be filled and strike off the excess material, preferably with a tool that’s made moist using clean water.
Step 3 : When applying to a damp or wet leaking area, work the material forcefully and apply pressure until adhesion begins to take effect. For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening. Remove excess material before hardening begins.
Step 4 : After 5-10 minutes the epoxy will begin to form a tenacious bond. After just 60 mins, Bondset Sanitary Under Water can be drilled, sawed, carved, sanded, stained or painted
Cure under water
Low shrinkage
Paintable
Bondset Sanitary Under Water Epoxy Putty is a hand-kneadable epoxy putty that mixes in one minute and is used for fast repairs in damp, wet or underwater areas.
Bondset Sanitary Under Water Epoxy Putty bonds to fibreglass, metal, wood, concrete, ceramic and glass substrates.
Knead the putty with your fingers until uniform in colour, apply within 2 minutes of mixing even underwater, and force it into cracks or holes, striking off excess with a water-moistened tool.
Bondset Sanitary Under Water Epoxy Putty begins forming a tenacious bond within 5-10 minutes, and after 60 minutes it can be drilled, sawed, carved, sanded, stained or painted.
Bondset Sanitary Under Water Epoxy Putty is commonly used for sealing CI pipe joints, sewage pipelines, ceramic tile joints, water supply mains, concrete pipes and water head tanks, as well as household items like cooler tanks and wash basins.
Yes, Bondset Sanitary Under Water Epoxy Putty is an industrial high-strength product that bonds tenaciously to wet surfaces and can be applied directly underwater.
Surfaces with dust, rust, oil or paint should still be cleaned where possible before application, even though Bondset Sanitary Under Water Epoxy Putty is designed to bond on wet substrates.
Avoid applying the putty more than 2 minutes after mixing, or neglecting to force it firmly into cracks and holes for a complete underwater repair.
Bondset Sanitary Under Water Epoxy Putty is specifically formulated to bond tenaciously to wet and underwater surfaces, a job ordinary adhesives cannot reliably perform.
Store Bondset Sanitary Under Water Epoxy Putty in a dry place in its original, properly closed packaging away from heat and moisture until ready to use.
Shelf Life: 12 months from date of manufacturing
Storage: Product should be stored be stored below 40°C in a cool and dry place away from sunlight in properly tight container.
After just 60 minutes can be drilled sawed carved sanded stained or painted
Bonds & seals various ferrous and non-ferrous substrate
Easily cures under water
Low Shrinkage
