Bondtite Aqua

Woodworking

BONDTITE AQUA is a single-component, white PVA emulsion adhesive with superior waterproof properties. It is a specially designed woodworking adhesive used in furniture to avoid debonding arising due to changes in weather conditions.

Available SKUs 5 kg 20 kg 50 kg 60 kg
4.6/5 (128 reviews)
USPS
  • Excellent Coverage
  • Superior Waterproof Aqua Shield Technology

It is a perfect adhesive for furniture exposed to high humidity and moist areas like kitchen and bathroom

Eco-friendly

Ready-to-use

Excellent coverage

Bondtite Aqua is suitable for all type of wood working in furniture like plywood, wood, laminates, veneers, particle board, block board/hard board, MDF to each other.

The usual procedure to be followed for application of Bondtite Aqua with the help of Astral Adhesive's Bondtite applicator is as follows

Step 1 : Clean both the surfaces to be bonded.

Step 2 : It is ready to use product so dilution is not recommended.

Step 3 : Apply an even coat of Bondtite Aqua first on comparatively non-porous surfaces and then on porous surfaces, for e.g. apply first on laminate and then on Plywood.

Step 4 : Depending on surrounding climatic conditions of temperature and humidity , give suitable open time .

Step 5 : Till the glue is wet on both the substatrets ,press those two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support etc., till the adhesive dries completely.

Step 6 : Excess adhesive pressed outside the joints should be wiped out with a wet cloth.

Waterproof up to 7 days and withstands boiling water up to 7 hours

Low odour

Single component

Improved spreadability

Bondtite Aqua Waterproof PVA Wood Glue is a single-component white PVA emulsion adhesive made for woodworking, designed to stop furniture from debonding when exposed to humidity and changing weather.

Bondtite Aqua Waterproof PVA Wood Glue bonds plywood, wood, laminates, veneers, particle board, block board/hard board and MDF to each other.

Clean both surfaces, apply Bondtite Aqua undiluted with an applicator, coating the non-porous surface first and then the porous surface, then press the pieces together and hold until set.

Allow about 24 hours for the bond to fully develop strength at room temperature before subjecting the joint to heavy stress.

Bondtite Aqua Waterproof PVA Wood Glue is commonly used for furniture exposed to high humidity, such as kitchen and bathroom cabinetry, as well as general woodworking joints.

Yes, Bondtite Aqua Waterproof PVA Wood Glue is formulated for superior waterproof performance, helping joints resist debonding from moisture and humidity.

Bondtite Aqua Waterproof PVA Wood Glue is intended for porous woodworking substrates and works best when at least one surface is porous, so it is not suited for non-porous materials like glass or metal, HDPE & LDPE.

Avoid diluting the ready-to-use adhesive, using a moist cloth during high-humidity monsoon conditions, and rushing the open time before pressing surfaces together.

Bondtite Aqua Waterproof PVA Wood Glue is specifically engineered to resist debonding caused by humidity and weather changes, which standard wood glues are not formulated to handle.

Store Bondtite Aqua Waterproof PVA Wood Glue in a dry and dark place in its original, properly closed container at temperatures between 2-40°C.

Shelf Life: Up to 1.5 Years

Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.

TDS

Bondtite Aqua