BONDTITE HEATBOND is a solvent-borne synthetic rubber-based adhesive formulated with a special feature providing excellent heat resistance up to 180° C. It also possesses quick grab property and strong bonding efficiency - ideal for application of vertical laminates.
Suitable for applications at heat prone areas - up to 180° C
High coverage to save cost
Best for bonding laminate over vertical and curved surfaces where faster bonding is required
Plywood to laminate
Leather articles
Bus body and automotive interiors
The usual procedure to be followed for application of Bondtite Heatbond with the help of Astral Adhesive's Bondtite applicator is as follows :
Step 1 : Surface preparation: Ensure that substrates to be bonded are clean, dry and free from oil, grease and foreign particles such as dust and rust.
Step 2 : Stir adhesive well and make it homogeneous prior to use.
Step 3 : Apply adhesive uniformly in thin layer on both the substrates to be bonded with Bondtite applicator or any suitable tool.
Step 4 : Allow evaporation of solvents from adhesive layer to develop tack.
Step 5 : The evaporation of solvent may take 5 to 10 minutes depending on ambient temperature and humidity.
Step 6 : Assemble both the substrates with uniform contact pressure to achieve intimate contact without air pockets. The optimum bond strength will be achieved after 24 hours.
Fast-setting
High strength
Excellent heat resistance
Superior spreadability
Bondtite Heatbond Heat Resistant Rubber Adhesive is a solvent-borne synthetic rubber adhesive built for excellent heat resistance, ideal for laminating vertical surfaces.
Bondtite Heatbond Heat Resistant Rubber Adhesive bonds laminates and similar substrates used in furniture and panelling work.
Clean and dry both substrates, stir the adhesive well, apply a thin uniform layer on both surfaces with an applicator, and let the solvent evaporate for 5-10 minutes to develop tack before pressing .
The solvent typically evaporates and tack develops within 5-10 minutes depending on ambient temperature and humidity, after which the surfaces can be bonded.
Bondtite Heatbond Heat Resistant Rubber Adhesive is mainly used for applying vertical laminates where quick grab and heat resistance are needed.
Yes, Bondtite Heatbond Heat Resistant Rubber Adhesive is formulated to provide excellent heat resistance up to 180°C.
Surfaces that are oily, greasy, dusty or rusty should be avoided, as Bondtite Heatbond Heat Resistant Rubber Adhesive requires clean, dry substrates for proper bonding.
Avoid applying the adhesive without stirring it first, bonding the surfaces before the solvent has evaporated, or applying an uneven layer with the applicator.
Bondtite Heatbond Heat Resistant Rubber Adhesive provides quick grab and heat resistance up to 180°C, which is important for laminate applications exposed to heat that ordinary contact adhesives cannot handle.
Store Bondtite Heatbond Heat Resistant Rubber Adhesive in a dry place in its original, properly closed container, away from heat sources and direct sunlight.
Shelf Life: Up to 1.5 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Laminate Pasting Specialist
Superfast setting
Withstandsup To 180°c
