BONDTITE HYDRA+ is a single-component premium white PVA emulsion adhesive with fast-setting and superior waterproof properties. It is a specially designed woodworking adhesive with anti-bubble, cross-linked technology to avoid debonding arising due to changes in weather conditions and promote faster-setting propoerties.
Bondtite Hydra+ is suitable for woodworking in furniture for kitchen, balconies, bathroom, etc. where water exposure is high. It is usable for bonding all types of woodworking like plywood, wood, laminates, veneers, particle boards, block board/hard board, MDF with each other.
The usual procedure to be followed for application of Bondtite Hydra+ with the help of Astral Adhesive's Bondtite applicator is as follows
Step 1 : Clean both the surfaces to be bonded.
Step 2 : It is ready to use product so dilution is not recommended.
Step 3 : Apply an even coat of Bondtite Hydra+ first on comparatively non-porous surfaces and then on porous surfaces, e.g. apply first on laminate and then on Plywood.
Step 4 : Depending on surrounding climatic conditions of temperature and humidity , give suitable open time
Step 5 : Till the glue is wet on both the substatrets ,press those two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support etc., till the adhesive dries completely.
Step 6 : Excess adhesive pressed outside the joints should be wiped out with a wet cloth.
Anti-bubble crosslinked technology
Fast-setting
Confirms EN204 to category D3
Superior spread ability
Bondtite Hydra+ Waterproof Wood Glue is a single-component, premium white PVA emulsion adhesive with anti-bubble, cross-linked technology designed for fast-setting, waterproof wood working joints.
Bondtite Hydra+ Waterproof Wood Glue bonds plywood, wood, laminates, veneers, particle boards, block board/hard board and MDF to each other.
Clean both surfaces, apply Bondtite Hydra+ undiluted on the non-porous surface first and then the porous surface, press the pieces together, and hold under clamps or nails until the glue dries fully.
Open time should be adjusted based on surrounding temperature and humidity, and the joint should be held under pressure until the adhesive dries completely, with excess glue wiped off with a wet cloth.
Bondtite Hydra+ Waterproof Wood Glue is commonly used for woodworking in kitchens, balconies and bathrooms where furniture faces high water exposure.
Yes, Bondtite Hydra+ Waterproof Wood Glue offers superior waterproof properties along with fast-setting performance.
Bondtite Hydra+ Waterproof Wood Glue is intended for porous wood-based substrates, so it is not suited for non-porous materials such as glass or metal and polymeric material .
Avoid diluting the ready-to-use adhesive, releasing clamping pressure too early, or leaving excess adhesive unwiped at the joint edges.
Bondtite Hydra+ Waterproof Wood Glue uses anti-bubble, cross-linked technology for faster setting and superior waterproof performance compared to a standard PVA wood glue.
Store Bondtite Hydra+ Waterproof Wood Glue in a dry place in its original, properly closed container at temperatures between 2-40°C.
Shelf Life: Up to 1.5 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Anti-Bubble Crosslinked Technology
Formaldehyde Free
