BONDTITE MULTIFIX NAIL SAVER is an instant and high-grab adhesive that has excellent bond strength on multiple substrates.
It is easy to apply non-slump, paintable and suitable for interior and exterior use. It can replace mechanical fixings in a variety of DIY applications.
Resists adverse effect of moisture and humidity on bonding
Compatible with paints
Long durability
Suitable for application in interior and exterior areas
Bondtite Multifix is suitable for multiple surfaces used in modern construction work including plywood, laminate, drywall, cement board, tile, glass, mirror, ceramic, porcelain, concrete, marble, granite, brick, aluminium, ACP, steel & alabaster.
Step 1 : Clean the surface to ensure that its dry and free from dust, dirt, oil, loose particles or any other contaminants.
Step 2 : Insert cartridge in cartridge gun , cut the opening of nozzle and fix V-cut nozzle.
Step 3 : Apply in threading pattern (zig – zag) maintaining distance of approx.11-12 cm between two adjacent beads.
Step 4 : Bring surfaces to be bonded into position as quickly as possible and press firmly for 5-10 minutes. Depending upon surrounding temperature position of substrates can be re-adjusted within 4-6 minutes.
Step 5 : It is recommended to keep gap of approx. 30-35 mm at all edges of the substrate to avoid ooze out of excess glue . It helps in controlling any visible gaps.
Step 6 : For putting heavier weights such as glass or marble shelf on wall mounted ‘C’ clamps or brackets, allow the adhesive to cure overnight before putting the shelves in place.
Step 7 : Seal the nozzle with help of a resitape papertape.
Step 8 : Before next use cut the nozzle tip to remove cured sealant and use fresh adhesive.
Step 9 : After use of product , wash hands with soap & water.
Good weather and water resistance
Paintable after curing
Excellent strength
UV-resistant
Bondtite Multifix Adhesive is an instant, high-grab adhesive with excellent bond strength on multiple substrates, designed to replace mechanical fixings in DIY applications.
Clean the surface so it is dry and free from dust, dirt, oil and contaminants, insert the cartridge in a cartridge gun, cut the nozzle for a V-cut, and apply in a zig-zag pattern about 11-12 cm apart.
Bondtite Multifix Adhesive is easy to apply and non-slump, allowing it to hold materials in position as it cures; full handling strength should be confirmed before heavy loading.
Bondtite Multifix Adhesive is commonly used for multiple surfaces in modern construction, including furniture, wood and panel applications.
Bondtite Multifix Construction Adhesive offers moisture resistance, making it suitable for interior and exterior use across a range of construction substrates.
Surfaces that are dusty, dirty or contain oil and loose particles should be cleaned first, as Bondtite Multifix Construction Adhesive needs a clean substrate to achieve a reliable bond.
Avoid applying the bead too close together or too far apart, skipping surface cleaning, or loading the joint before sufficient bond strength has developed.
Bondtite Multifix Construction Adhesive provides strong bonding and moisture resistance across an unusually wide range of construction substrates, making it a practical alternative to mechanical fixings.
Store Bondtite Multifix Adhesive in its original, properly closed cartridge in a dry place away from heat and direct sunlight.
Shelf Life: Up to 1 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Bonds Multiple Substrates
High weight bearing capacity
Paintable
Quick grab
