BONDTITE QUIK SPRAY is a sprayable rubber-based adhesive which gives superior bonding over a variety of surfaces where immediate bond strength with optimum heat resistance is required.
Can be applied on areas like ceiling, inside of wardrobes and areas which otherwise are difficult to reach
It can effectively bond foam, metal, wood, etc with each other
Step 1 : Shake the container well enough to mix homogeneously . Ensure surfaces to be bonded are clean and free from contaminants.
Step 2 : Hold the can 8 - 10 cm away at a 90degree angle to the surface.
Step 3 : Spray evenly on surface with a 50% overlap for full coverage.
Step 4 : Leave surfaces for 1-2 minute or until dry to touch depending on ambient humidity and temperature.
Step 5 : Place surfaces together and apply even pressure to solidify bond, a roller is recommended to do this.
Fast bonding
No odour
High temperature resistant up to 120° C
Easy-to-use
Bondtite Quik Spray Rubber Adhesive is a sprayable rubber-based adhesive that gives superior bonding where immediate bond strength and optimum heat resistance are required.
Bondtite Quik Spray Rubber Adhesive Spray effectively bonds foam, metal and wood with each other, and works well on laminate-to-plywood applications.
Shake the container well, ensure surfaces are clean and free of contaminants, hold the can 8-10 cm from the surface at a 90-degree angle, spray with 50% overlap, leave for 1-2 minutes, then press surfaces together and roll for solid contact.
Bondtite Quik Spray Rubber Adhesive Spray is generally ready to bond within 1-2 minutes of spraying, once it becomes dry to the touch, depending on ambient temperature and humidity.
Bondtite Quik Spray Rubber Adhesive Spray is commonly used on ceilings, inside wardrobes and other hard-to-reach areas, and by carpenters as an instant bonding tool.
Bondtite Quik Spray Rubber Adhesive Spray is formulated to deliver immediate bond strength with optimum heat resistance for demanding applications.
Surfaces that are dusty, oily or otherwise contaminated should be avoided, since Bondtite Quik Spray Rubber Adhesive Spray needs clean surfaces to bond reliably.
Avoid skipping the can shake step, spraying too close or too far from the surface, or pressing surfaces together before the recommended 1-2 minute drying window.
Bondtite Quik Spray Rubber Adhesive Spray bonds laminate to plywood in seconds and reaches hard-to-access areas more easily than brush-applied adhesives, while offering heat resistance.
Store Bondtite Quik Spray Rubber Adhesive Spray in a dry place in its original, properly closed container, away from heat and direct sunlight.
Shelf Life: Up to 1 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Expert in Foam Bonding
Hassle-free Application
Superfast Bonding
Superior Bond Strength
