FILLX STAIN FREE EPOXY GROUT is a three-component epoxy grout which is specially designed for grouting of ceramic tiles, vitrified tiles and stone where staining is expected.
Suitable for bathrooms, fountains, kitchens, cafeterias, restrooms, schools, factories, workshops, warehouses, pharma industry, hospitals, labs, commercial and residential buildings
Step 1 : Remove dust, oil, debris and sealer from the joints with the help wire brush or air blower
Step 2 : Take Part-A & Part-B into a suitable container and mix perfectly with a trowel or a slow drill mixer
Step 3 : Now add Part-C powder in this mix slowly to get a uniform consistency. Mix as stiff as possible to work into the joints
Using a hard rubber grout float, compact the grout into the joints ensuring that they are completely filled. Work in small areas and remove as much excess from the tile surface as possible. Strike off excess materials diagonally to the grout lines.
Plug open-ended joints with the stiffer mix to prevent any slumping of the grout joints from occurring
Step 4 : Within 30 minutes of application, clean off surplus grout. Use an EMULSIFYING PAD & GRIPPER dampened with clean water to break down (emulsify) the grout residue. Use a circular motion and keep the pad and gripper flat relative to the tile surface to achieve a flush joint. Warm water, although not essential will greatly ease the emulsification process
Do not allow water to flow/run into ungrouted joints
Step 5 : Clean off the emulsified epoxy/water residue with a fine sponge, taking care not to drag grout from the joints, clean diagonally to the grout lines. Tool joints to finish Any light haze remaining on the tile surface can be cleaned off the next day using the EMULSIFYING PAD & GRIPPER and an alkaline detergent. Do not allow the haze to remain on the surface for any longer than 24 hours.
Resistant to mild chemicals and acids
Easy to apply and clean
Non-cracking
Water cleanable within 30 minutes after application
Available in a wide range of colours
Water-resistant
Shelf Life: 24 months in unopened sealed original packaging in a strictly dry and cool storage place.
Storage: Product should be stored in a dry place in their original form with properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
Non-cracking or Powdering
Resistant to mild chemicals & acids
Stain-free application
Waterproof