Suitable for manufacturing of sealing fans, motors, auto engines, typewriters, etc.
Step 1 : Surfaces should be clean and free from oil and grease.
Step 2 : Product should be applied to the shaft in sufficient quantity to fill all engaged gaps. Then tight with rotor on adhesive applied area.
Step 3 : This product performs best in thin bond gaps, (0.05mm). Very large thread sizes may create large gaps, which will affect cure speed and strength.
Step 4 : This product is designed to give controlled friction, (torque/tension ratio), during assembly. In critical tightening applications, this ratio should be confirmed.
Single component
Free flowing liquid
Fast curing at room temperature
Resimet BR 822 is an anaerobic, medium-strength adhesive used for assembling bearings to casings.
It is designed for metal-to-metal assembly, such as bearings and shafts in fans, motors and engines.
Apply the adhesive to the shaft in sufficient quantity to fill all engaged gaps, then fit the rotor onto the treated area.
Resimet BR 822 is a fast-curing adhesive that sets at room temperature; specific cure-time figures are not listed.
Common applications include manufacturing of sealing fans, motors, auto engines and typewriters.
Resimet BR 822 is single-component and free-flowing; waterproof and heat-resistance upto 120 deg C.
Avoid using Resimet BR 822 on surfaces with oil or grease, since clean, dry surfaces are needed for the bond to cure properly.
Common mistakes include using it on very large bond gaps, which can slow curing and reduce strength, instead of thin gaps around 0.05mm.
Resimet BR 822 is a single-component, free-flowing liquid that cures fast at room temperature for reliable bearing assembly.
Store Resimet BR 822 below 40°C in a cool, dry place away from heat and sunlight in a tightly closed container.
Shelf Life: 12 months in a partially filled packing and strictly store in cool, away from heat.
Storage: Product should be stored be stored below 40°C in a cool & dry place away from sunlight in properly tight container.
