It is being applied where higher diameter i.e. 20 mm fasteners are used. Suitable for compressor pumps, heavy motor mounting bolts, big gear boxes and equipment and automobile manufacturing etc.
Step 1 : For best performance, surfaces should be clean and free from oil and grease.
Step 2 : Product should be applied to the bolt in sufficient quantity to fill all engaged threads. Then tint the nut on adhesive applied area.
Step 3 : This product performs best in thin bond gaps(0.05mm). Very large thread sizes may create large gaps which will affect cure speed and strength.
Step 4 : This product is designed to give controlled friction, (torque/tension ratio), during assembly.In critical tightening applications this ratio should be confirmed.
Single component adhesive
Liquid in nature
Fast curing at room temperature
Shelf Life: 12 months in a partially filled packing and strictly store in cool, away from heat.
Storage: Product should be stored be stored below 40°C in a cool & dry place away from sunlight in properly tight container.
