BONDTITE HEATBOND is a solvent-borne synthetic rubber-based adhesive formulated with a special feature providing excellent heat resistance up to 180° C. It also possesses quick grab property and strong bonding efficiency - ideal for application of vertical laminates.
Suitable for applications at heat prone areas - up to 180° C
High coverage to save cost
Best for bonding laminate over vertical and curved surfaces where faster bonding is required
Plywood to laminate
Leather articles
Bus body and automotive interiors
Step 1 : Surface preparation: Ensure that substrates to be bonded are clean, dry and free from oil, grease and foreign particles such as dust and rust.
Step 2 : Stir adhesive well and make it homogeneous prior to use.
Step 3 : Apply adhesive uniformly in thin layer on both the substrates to be bonded with Bondtite applicator or any suitable tool.
Step 4 : Allow evaporation of solvents from adhesive layer to develop tack.
Step 5 : The evaporation of solvent may take 5 to 10 minutes depending on ambient temperature and humidity.
Step 6 : Assemble both the substrates with uniform contact pressure to achieve intimate contact without air pockets. The optimum bond strength will be achieved after 24 hours.
Fast-setting
High strength
Excellent heat resistance
Superior spreadability
Shelf Life: Up to 1.5 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Laminate Pasting Specialist
Superfast setting
Withstandsup To 180°c
