SOLVOBOND CPVC 707 is a yellow-coloured medium-bodied CPVC solvent cement for joining CPVC pipes and fittings. It is recommended for potable water piping as well as pressurized pipes. It can withstand temperature upto 82°C.
Step 2 : Remove burr, roughen and clean the outer surface of the pipe and inner surface of the socket
Step 3 : Check the dry fit of pipe & fitting. It should go up to end of the fitting easily.
Step 4 : Apply Solvobond CPVC 707 evenly using suitable applicator on outer surface of the pipe and inner surface of the socket.
Step 5 : Wipe off excess cement.
Step 6 : Twist the pipe 45°-90° while inserting into the socket for better spreading of Solvobond CPVC 707 and hold for 30 sec.
Step 7 : Partially emptied container should be close immediately.
Step 8 : Allow 2 min to get good handling strength. 1 hr for cold water system upto 160 psi, 6 hr for hot water system upto 100 psi @82°C. For pipe size 1.5” (50 mm) or larger, higher temperature & pressure longer cure time is require.
Low VOC
Higher brust strength
Meets ASTM F-493 Standards
Solvobond CPVC 707 CPVC Solvent Cement is a yellow-coloured, medium-bodied solvent cement used for joining CPVC pipes and fittings, including pressurized and potable water piping.
Solvobond CPVC 707 CPVC Solvent Cement is designed specifically for joining CPVC pipes and fittings.
Clean and roughen the pipe and socket surfaces, check the dry fit, apply Solvobond CPVC 707 evenly on both surfaces, then twist the pipe 45-90 degrees into the socket and hold for 30 seconds before wiping off excess cement.
Allow 2 minutes for initial handling strength, 1 hour for cold water systems up to 160 psi, and 6 hours for hot water systems up to 100 psi at 82°C.
Solvobond CPVC 707 CPVC Solvent Cement is commonly used for potable water piping and pressurized pipe systems that need resistance to temperatures up to 82°C.
Yes, Solvobond CPVC 707 CPVC Solvent Cement can withstand temperatures up to 82°C and resists algal and bacterial growth, meeting ASTM D-2846 and F-493 standards.
Solvobond CPVC 707 CPVC Solvent Cement is formulated specifically for CPVC pipework and should not be used on unrelated pipe materials such as metal or different plastic types.
Avoid skipping the dry-fit check, applying cement at temperatures below 5°C without adjustment, or disturbing the joint before the recommended cure time.
Solvobond CPVC 707 CPVC Solvent Cement is engineered for high-temperature, pressurized CPVC piping and meets ASTM D-2846 and F-493 standards, performance an ordinary adhesive cannot deliver.
Store Solvobond CPVC 707 CPVC Solvent Cement in a dry place in its original, properly closed container, and reseal partially used containers immediately.
Shelf Life: 2 years for tin container and 4 years for Coex pack from date of manufacture (Storage Temp 2-40°C) for
Storage: Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
High-pressure Resistance
Ideal for Hot-water Plumbing
Resists Algal & Bacterial Growth
Temperature resistance up to 82˚C
