Back

Trubuild

Overview Usage Product Specifications Handling Precautions
TCSR 555

Two-component solvent free epoxy system for repairing cracked and damaged concrete structures. It is used for bonding of new structural concrete to old concrete, bricks & steel component as it gives excellent bonding properties with various construction surfaces.

Application
Applications
  • Excellent system for bonding of old to new concrete/mortar, repair old concrete structure and same can be extended further
  • It is used for crack filling, foundation bolt grouting and patch repair by using quartz sand and powder
Application
Advantages
  • It has excellent adhesion and strength on various construction substrates and easy to apply due to low mix viscosity.
  • It has very low shrinkage and high open time.
How to use
How to use

Surface Preparation:

  • Surface must be thoroughly cleaned and remove all loose particles, dirt, dust, laitance, oil grease etc by using wire brush, scrapping or grit blasting, pressurized air or water jet.

 

Holdfast grouting:

  • Take resin and hardener as per mentioned ratio, add dry stone chips and quartz sand into the so that it becomes paste. Fill the paste into the cavity and spread dry sand over the patch, which provide surface for bonding with new cement for plaster

 

Water proofing:

  • Take resin and hardener as per mentioned ratio, mix thoroughly, apply the mix on clean and concrete surface. Leave applied surface untouched for 24 hours. Apply second coat of mix by paint followed by laying of 1” thick layer of cement mortar to prevent the treated surface from the effect ultra violet rays

 

Old concrete to new concrete bonding:

  • Take resin and hardener as per mentioned ratio, mix thoroughly and apply the mix on old concrete surface pour new concrete mix immediately over the area on which TRUBUILD has been applied. Quatz and silica has been added as per requirement
Storage
Storage

Product should be stored in a dry place in their original, properly closed containers at temperature between 2 - 40°C. Partially emptied container should be closed immediately.

Shelf Life
Shelf Life

3 Years in unopened containers

Packing
  • Packing

    Bottle:
    300 gm set, 1.5 kg set and 7.5 kg set

Application
Handling precautions

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.

X
Enquire Now