Back
Trubuild
Overview
Usage
Product Specifications
Handling Precautions
HCF 351
Trubuild high penetration is a modified system designed for filling very fine micro cracks present on marble surface.
Applications
Use for filling micro cracks and pin holes on marble.
Advantages
- High penetration
- Easy to use
- Low viscous
- High working time
How to use
Crack Filling
- Take resin & hardener in the above mentioned ratio, mix thoroughly and take it in dispensing bottle, dispense the mix over the crack
- Pigmentation can be done by mixing dry cement color as per color of marble
- Mix will cure in 24 hours after that polishing can be done on that marble
Micro Crack Treatment
- Take resin & hardener in above mentioned ratio, mix thoroughly and apply over the surface with the help of spatula.
- If required, epoxy thinner can be added for further reduction in viscosity.
- Polishing of marble can be done only after 24-30 hours.
Properties
- Liquid epoxy resin/hardener for marble treatment.
Shelf Life
2 years
Storage
Product should be stored in a dry place in their original form with properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
Packing
-
Bottle:
300 gm set, 1.5 kg set & 7.5 kg set
Handling precautions
Mandatory and recommended industrial hygiene procedures should be followed whenever this product is being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.
Similar Products
© 2021-2022 ASTRAL ADHESIVES ALL RIGHTS RESERVED.
Open
X
