Trubuild

Trubuild CPS is used for water proofing of cement-sand mortar used for making roof slabs, bathrooms, drains, basements, water tanks etc.

• Reduces the permeability of water to the concrete hence giving excellent water proofing and along with this protecting reinforced steel bars against corrosion
• Single component product and easy to use due to its low viscosity
• It improves workability of freshly mixed concrete and increases durability of concrete without affecting the strength of concrete

• Mix cement, aggregates in a mixture as per the desired ratio in dry state for 1-2 min, now charge water as per the standard ratio of particular application and mix for 2-3 min
• Mix Trubuild CPS as per the recommended dosage and then again mix for -3 min and now use the mixture as per the requirement
• Cure the applied mortar or concrete as per good construction practices

Appearance Transparent Color Brown-red pH 9-13 Specific Gravity 1.03-1.07 % Solid 11-14% Setting Time IS: 2645: 2003 30-600 min Chloride content IS: 2645: 2003 Max 2% Water permeability IS: 2645: 2003 Pass Compressive Strength IS: 2645: 2003 As per the standard

• Trubuild CPS should be use in recommended dosage
• Do not directly mix Trubuild CPS directly to cement
• Make sure that water-cement ratio should be lowest

1.5 years (Storage Temp 2-40°C)

Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.

200 ml per 50 kg bag of cement