Bondtite Epoxy Adhesives

Overview Usage Product Specifications Handling Precautions
Bondtite Gel

Bondtite Gel is a high strength two component highly viscous thixotropic adhesive. It is an excellent adhesive for sealing electronic components, coating on tile joints to avoid color change of grout by acting as a weather shield, for making small beads over sari, chunri, hair clips and artificial jewelry. Jari & colors can be added to give desired effect on textile, glass etc.


Bondtite Gel is high thixotropic two-part epoxy adhesive for any non-sag application.

  • Thixotropic non sag
  • Waterproof joints 
  • Bond multiple substrate
  • Excellent strength
How to use
How to use

Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth. Wash glass and ceramic surfaces with soap and water then rinse and let dry. Pre-fit parts to be joined. Squeeze equal volume of material from both part-A & part-B. Mix resin and hardener for more than 2 minute thoroughly and then apply as per requirement. Fully cured in 24 hours.

Usage Restriction
Restriction of usage
  • Does not bond to polyethylene or polypropylene plastics
  • Applications requiring short-term heat exposure of greater than 150°C Continuously wet areas or water immersion Potable water systems
  • Do not use on areas that will come in contact with food related items
Shelf Life
Shelf Life

3 years from date of mfd. (Storage Temp 2-40°C)


Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.

  • Packing

    270 gm, 2 kg set & 5 kg set

Handling precautions

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.

Enquire Now