Bondtite Gel is a high strength two component highly viscous thixotropic adhesive. It is an excellent adhesive for sealing electronic components, coating on tile joints to avoid color change of grout by acting as a weather shield, for making small beads over sari, chunri, hair clips and artificial jewelry. Jari & colors can be added to give desired effect on textile, glass etc.
Bondtite Gel is high thixotropic two-part epoxy adhesive for any non-sag application.
Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth. Wash glass and ceramic surfaces with soap and water then rinse and let dry. Pre-fit parts to be joined. Squeeze equal volume of material from both part-A & part-B. Mix resin and hardener for more than 2 minute thoroughly and then apply as per requirement. Fully cured in 24 hours.
Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
3 years from date of mfd. (Storage Temp 2-40°C)
270 gm, 2 kg set & 5 kg set
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.