Solvobond is a high quality PVC solvent cement used for repairing and bonding of PVC pipes & components made from PVC like telephones, PVC floor tiles, PVC doors etc.
Excellent solvent cement for bonding irrigation, electrical conduit and plumbing PVC pipe joints which can with stand temperature upto 50°C
Method of application:
Cut pipe square and remove burrs
Before applying the Solvobond roughen and clean the outer surface of PVC pipes and inner surface of socket
Check the dry fit of pipe & fitting it should go upto end of pipe easily but should be came tight on half way
Apply Solvobond evenly by using suitable applicator on outer surface of pipe
Inner surface of socket
Rotate the pipe 1/4th while inserting into the socket for better spreading of Solvobond and hold for 30 seconds
Wipe off excess of Solvobond and leave the surface untouched for 1 hour for perfect bonding
Partially emptied container should be closed immediately
18 months from the date of manufacturing.
Product should be stored in a dry place in their original tube pack.
5 ml, 10 ml, 13 ml, 25 ml, 35 ml, 50 ml, 75 ml, 100 ml
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed.
Highly flammable liquid and vapor. Harmful if swallowed. Harmful in contact with skin. Harmful if inhaled. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat/sparks/open flames and hot surfaces. No smoking. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting/equipment. Take precautionary measures against static discharge. Wear protective gloves/eye protection/face protection. Do not eat, drink or smoke when using this product. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing fume/gas/mist/vapors. Use only outdoors or in a well-ventilated area