Truzo CPVC Welder is a medium-bodied yellow colored CPVC solvent cement for jointing CPVC pipe and fittings.
Excellent solvent cement for CPVC pipe and fittings. It can be used for potable water, pressurized pipe and can with stand upto 82°C.
Method of application:
Cut pipe square and remove burrs
Before applying the Truzo roughen and clean the outer surface of PVC pipes and inner surface of socket
Check the dry fit of pipe & fitting it should go upto end of pipe easily but should be came tight on half way
Apply Truzo evenly by using suitable applicator on outer surface of pipe and inner surface of socket, assemble parts quickly. Twist the pipe 45°-90° while inserting into the socket for better spreading of Truzo and hold for 30 second
Wipe off excess of Truzo and leave the surface untouched for 1 hr cure for cold water application and 6 hrs for hot water application
Partially emptied container should be closed immediately
18 months in prescribed storage condition.
Product should be stored in a dry place in their original, properly closed containers.
5 ml, 15 ml, 25 ml, 50 ml, 100 ml
50 ml, 100 ml, 200 ml, 500 ml, 1 litre
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed.
Highly flammable liquid and vapor. Harmful if swallowed. Harmful in contact with skin. Harmful if inhaled. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat/sparks/open flames and hot surfaces. No smoking. Keep container tightly closed. Use explosion-proof electrical/ventilating/lighting/equipment. Take precautionary measures against static discharge. Wear protective gloves/eye protection/face protection. Do not eat, drink or smoke when using this product. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing fume/gas/mist/vapors. Use only outdoors or in a well-ventilated area.