ResiPro

It is suitable for almost every structural elastic bonding in building and metal working industry. It can be applied for structural bonding application in construction (wall and floor panels, wood, metal, glass, cement/concrete, plaster board, hard plastics, etc.) and automoative (cars, coaches, caravans, marine, trains etc)

Surfaces to be bonded should be clean, dry, sound and free from dust. If required, surfaces can be cleaned prior to application using an appropriate cleaner. Mask adjacent surfaces with a protective tape for a neat finish and easy clean up. Carefully cut the tip of the cartridge taking care not to damage the threaded area. Screw on the nozzle supplied and cut to an angle of approximately 45°, to an opening slightly larger than the gap to be filled. Apply using a standard sealant gun. Extrude the sealant in to the joint, filling the cavity completely. Tool sealant with a soap solution wetted spatula and remove protective tape before the sealant starts to skin. Sealant will begin to cure after 5 minutes, will be touch dry after 1 hour and reach full cure after 3 days (7mm depth). Uncured material should be removed using solvent cleaner (eg. mineral turpentine). Apply to a cloth and wipe. Cured material should be removed by sanding or trimming with a sharp blade.

12 months in unopened packaging in a dry and cool storage place, at temperatures between +5°C and +25°C.