ResiBond

Resibond Glazing-2010 is used for bonding and sealing glass, ceramics, aluminum, painted surfaces, etc.

• Surfaces must be clean, dry & free from grease and detergents
• Mask adjacent surfaces for neat application
• Cut tip of cartridge, cut nozzle to desired size at 45° angle, attach to cartridge, and place in caulking gun
• Apply sealant in continuous, steady flow. Push sealant ahead of nozzle contacting both sides of joint so it is completely filled
• Smooth sealant surface immediately after application before skin forms. Use spatula dipped in mild detergent. Remove masking tape before sealant skins
• Excess uncured sealant should be removed immediately with clean cloth damped in mineral turpentine

Resibond Glazing 2010 should not be used on substrates such as marble, concrete, fibrous cement, mortar, metals such as lead, copper, brass or zinc, as the product releases acetic acid during curing. In this case use a neutral grade such as Resibond MP 3010. Resibond Glazing 2010 may be discolored in contact with some organic elastomers, example EPDM and neoprene. It is not suitable for applications involving contact with natural stone, such as marble, granite, quartzite, as it can cause staining. It must not be used for structural glazing bonding.

12 months in unopened packaging in a dry and cool storage place, at temperatures between +5°C and +25°C.

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult material safety data sheet.