Back

ResiBond

Overview Usage Product Specifications Handling Precautions
Resibond Thermoseal 7010

Resibond Thermoseal 7010 is a specially developed Oxime cure silicon sealant which cures to a tough rubbery solid when exposed to moisture in the air. It is used for high temperature & heavy duty applications. It replaces almost any gasket used in automobile & engineering applications. The gasket made with Resibond HT 7010 resists cracking, shrinkage & migration caused by thermal cycling. Pre cut gasket can be coated with Resibond HT 7010 to increase reliability.

Application
Applications

Resibond Thermoseal 7010 sealant can be used for for making and sealing all type of gaskets where high temperature resistance is required. It is oil resistance and therefore, can be used in all engines. Also, it replaces paper, cork, silicon & rubber gasket in the industry.

How to use
How to use
  • Surfaces must be clean, dry & free from dust, oil and grease
  • Mask adjacent surfaces for neat application
  • Apply sealant in continuous, steady flow. Push sealant ahead of nozzle contacting both sides of joint so it is completely filled
  • Smooth sealant surface immediately after application before skin forms. Use spatula dipped in mild detergent. Remove masking tape before sealant skins
  • Excess uncured sealant should be removed immediately with clean cloth damped in mineral turpentine
  • When sealing a metal lap joint, apply sealant to one surface in a continuous bead through the line of intended fasteners and fasten immediately. If no fasteners are to be used, ensure sufficient sealant is used and joint supported while sealant cures
Shelf Life
Shelf Life

12 months in unopened packaging in a dry and cool storage place, at temperatures between +5°C and +25°C.

Storage
Storage

Product should be stored in a dry place in their original, properly closed containers at temperature between 2 - 40°C.

Packing
  • Packing

    Plastic Cartridge
    300 ml

  • Packing

    Aluminium Tube:
    4 ml, 10 ml, 15 ml, 20 ml, 25 ml, 35 ml, 50 ml, 85 ml & 100 ml

Application
Handling precautions

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.

X
Enquire Now