Bondtite Epoxy Adhesives

Bondtite Fast & Clear is a 5 min epoxy, so it can be used at those places where instant strength is required. It remains unaffected to mild alkalis, acids, etc. It is a non-toxic, electrically insulating adhesive which does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.

• Clear & transparent bond
• High strenght
• Bond multiple substates
• Solvent free

• Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
• Wash glass and ceramic surfaces with soap and water then rinse and let dry.
• Pre-fit parts to be joined.
• Squeeze equal volumes of the material from both part-A & part-B. Mix  part-A & part-B for one minute thoroughly and then apply as per requirement.
• Clamp it for 30 minutes.                                
• Full Strength will be achieved  in 4 hours

• Does not bond to polyethylene or polypropylene plastics
• Applications requiring short-term heat exposure of greater than 150°C
• Continuously wet areas or water immersion
• Portable water systems
• Do not use on areas that will come in contact with food related items

2 years from the date of manufacturing.

Product should be stored in a dry place in their original, properly closed container.