Back

Metal Glue - Bondtite

Overview Usage Product Specifications Handling Precautions
Bondtite Rapid

Bondtite Rapid is a fast setting, two-component epoxy adhesive system. It can be used as an adhesive for a wide range of materials like metal, ceramic, wood, chrome, concrete, marble, glass, fiberglass, tiles etc.

Application
Applications

Bondtite Rapid is fast-setting epoxy so it can be used at places where instant strength is required. It remains unaffected to mild alkalis, acids etc., and it is also non-toxic and electrically insulating adhesive. It does not shrink and is resistant to water and most common solvents.

Application
Advantages
  • 10 Min. Setting time
  • High initial strength
  • Bond multiple substates
  • Solvent free
How to use
How to use
  • Surfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion by sandblasting or sanding with emery cloth.
  • Wash glass and ceramic surfaces with soap and water then rinse and let dry.
  • Pre-fit parts to be joined.
  • Squeeze equal volumes of the material from both part-A & part-B. Mix  part-A & part-B for one minute thoroughly and then apply as per requirement.
  • Clamp it for 30 minutes.                                
  • Full Strength will be achieved in 4 hours.
Usage Restriction
Restriction of usage
  • Does not bond to polyethylene or polypropylene plastics
  • Applications requiring short-term heat exposure of greater than 150°C
  • Continuously wet areas or water immersion
  • Potable water systems
  • Do not use on areas that will come in contact with food related items
Storage
Storage

Product should be stored in a dry place in their original, properly closed container.

Shelf Life
Shelf Life

2 years from the date of manufacturing.

Packing
  • Packing

    Tube:
    3 gm, 10 gm, 35 gm, 87.5 gm, 175 gm, 875 gm set & 1.75 kg set

Application
Handling precautions

Please consult the product safety data sheet

X
Enquire Now