Back

Vegaquick

Overview Usage Product Specifications Handling Precautions
Vegaquick

Vegaquick is a general-purpose low viscosity, ethyl cyanoacrylate adhesive which is suitable for the flex board industry for bonding flex to metal or other substrates.

Application
Applications

It is recommended for bonding flex to metal or wooden surface. It is also used by industries like auto assembly shops, electronic goods repairer / manufacturer, auto mechanics & at home for general bonding applications. It bonds instantly to most plastics, rubber, ceramic, metal like non porous substrates & porous substrates like wood, leather etc. It will not bond PTFE, nylon, polypropylene etc.

How to use
How to use
  • Make sure the surfaces to be bonded are clean and dry.

  • Dispense a drop or drops to one surface only. Apply only enough to leave a thin film after compression.

  • Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less than one minute.

  • Wipe off excess adhesive from the top of the nozzle and recap if left uncapped, may deteriorate by contamination from moisture in the air.

  • Because Vegaquick condenses by polymerization, sometimes whitening will occur on the surface of the container.

Usage Restriction
Restriction of usage

It will not bond PTFE, nylon, polypropylene etc.

Storage
Storage

Keep products in the unopened container in a cool and dry location. Best when stored product in a cool, dry place at temperatures between 20-25o C. Temperatures less than 2o C can adversely affect product properties. Do not freeze. Keep packing tightly closed until ready for use.

Shelf Life
Shelf Life

9 months from date of manufacturing. It comes without warranty as storage condition can affect the shelf life.

Packing
  • Packing

    Plastic bottle:
    10 gm, 15 gm, 20 gm, 30 gm & 50 gm

Application
Handling precautions
  • Material removed from containers may be contaminated during use. Do not pour back any product to the original container. Misuse of product will void all warrantees.
  • Use with proper ventilation. Avoid contact with skin and eyes.
  • If contact with skin occurs, rinse with warm water or dissolve gradually with solvent such as acetone. Do not try to remove forcibly.
  • If adhesive gets into eye, keep eye open and rinse thoroughly. Seek medical attention immediately.
  • Keep well out of reach of children.
  • For additional information, please consult material safety data sheet.
X
Enquire Now