Back

Bondtite Quick

Overview Usage Product Specifications Handling Precautions
BONDTITE QUICK

BONDTITE QUICK is a low viscosity cyanoacrylate instant adhesive used for various general purpose applications. It is supplied in attractive user friendly plastic ampoule. First time in globe LDPE is being used to fill Super glue which gives controlled flow and easy squeezibility.

Application
Applications

BONDTITE QUICK is used for instant repair of broken item as it bonds most of the plastic, metal, alloys, marble, rubber, polycarbonate, epoxy, bakelite, ceramics and other common substrates. Recommended for use on assemblies with very close fitting part’s and smooth, even surfaces. It give instant bonding even on expensive items like jewellery, antiques and electronics.

BONDTITE QUICK can be used in any general purpose application like repairing of any auto assembly, crockery, jewellery, clock, plastic toy, electronics & home appliances etc.

How to use
How to use
  • Make sure the surfaces to be bonded are clean and dry.
  • For opening of ampoule, hold the ampoule in vertical position and tap the cap so that whatever material present in neck area should be drop down.
  • Now twist the cap to open the ampoule.
  • Dispense a drop or drops to one surface only. Apply enough quantity to achieve a thin film after compression. Curing time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or bond failure.
  • Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less than one minute based on the substrate.
  • Wipe off excess adhesive from the top of the nozzle and recap BONDTITE QUICK to the three re-closures given on the cap. If left uncapped, may deteriorate by contamination from moisture in the air.
  • Because BONDTITE QUICK condenses by polymerization, sometimes whitening will occur on the surface of the ampoules when humidity is high.

   

PROPERTIES TESTING STANDARD RESULTS
PHYSICAL STATE   Low Viscous Liquid
APPEARANCE   Transparent
COLOR   Colorless
VISCOSITY @ 25°C ASTM D 2196–05 2-3 cps
Sp. GRAVITY @ 25°C ASTM D 1475 1
SETTING TIME (SEC)   2 - 4 Sec
TENSILE STRENGTH (KG/CM²) ASTM-D 1002-10 60-80

 

Usage Restriction
Restriction of usage

Not recommended for polyethylene, Polypropylene EPDM Rubber, Silicone rubber, Teflon, Styrofoam etc.

Shelf Life
Shelf Life

10 months from date of manufacturing when stored in the original unopened pouch. Use within 30 days once opened. Without warranty as storage condition will affect the shelf life.

Storage
Storage

Keep products in the unopened packing in a cool and strictly in dry location. Best when stored product in a cool, dry place at temperature 20-25°C and humidity not more than 50%. Temperatures less than 2°C can adversely affect product properties. Do Not Freeze. Keep packing tightly closed until ready for use.

Packing
  • Packing

    Plastic ampoule:
    500 mg 

Application
Handling precautions

BONDTITE QUICK bonds with skin or any other body part. In case of skin bonding, do not pull apart. Soak in warm water or nail polish remover and peel slowly. In case of eye contact, rinse cautiously with plenty of water for several minutes, if irritation persists: Get medical advice. Keep out of reach of children. For additional information please consult the material safety data sheet.

X
Enquire Now