Trubuild
Trubuild MRA (Mould Release Agent) is a ready to use mix which is used as release agent of molds or shuttering. It will be used on moulds and framework made of various substrate like wood, steel, plywood etc.
On moulds and framework made of various substrate like wood, steel, plywood etc.
- Rusted moulds and frame work should be cleaned properly before use with the help of emery paper or wire brush followed by cleaning through wet cotton cloth to remove dust and dirt
- Now apply one coat on the mould or frame work by spray or with the help of brush or roller and allow it to dry completely before casting of concrete. For better results, finish of concrete two coats are recommended on wood or plywood shuttering. Excess usage of Trubuild MRA should be avoided as it gives imperfect concrete finish
Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
1.5 years
-
Bottle:
1 litre, 5 litre and 20 litre
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.
