Back

Trubuild

Overview Usage Product Specifications Handling Precautions
WPL 333

Trubuild WPL (Water proofing latex) is a ready to use styrene butadiene latex. It is used for repairing of old construction like floor, beams slabs etc and water proofing of toilets, kitchen, bathroom and terraces. It has excellent bonding strength for old to new concrete and to plaster. It reduces shrinkage, cracking and dust pick up of the surface.

Application
Applications
  • It is used for different concrete repair application like spalled concrete, floor, columns, beams, slab and parapet etc.
  • It is also used for water proofing of toilets, kitchen, bathroom and terraces
  • It is used as a bond coat and bonding mortar for old to new concrete for tiles & panel etc.
Application
Advantages
  • Free from chloride content
  • Single component product and easy to use due to its low viscosity
  • It prevents cracking, improves hardness and prevents dust generation
  • It has excellent bonding on various substrates like concrete, masonry, stone work, plasters, and most of the building materials
How to use
How to use

Surface Preparation

  • The surface should be clean and dried before application. It should be free from dust, unsound material, loose plaster, oil, paint, grease, algae and corrosion deposits. Roughen the any smooth surface by scrubbing.

 

Mixing

  • For less than 25 kg on mix hand mixing is permissible, for quantity above to 25 kg use of proper mixture is recommended to get proper mixing. Before application surface should be thoroughly saturated with water and ensure removal of any excess water prior to application.

 

Water proof coating

  • For water proof coating make a slurry of 1:1.5 ratio (by volume) or 0.2: 1 ratio (by weight) of Trubuild WPL and cement. Charging of cement and mixing should be done slowly to avoid any air entrapment.
  • Apply one coat on surface and allow it to dry. After 4-6 hrs of first coat, apply second cost and then again allow it to dry. The repair or top mortar application should be carried out when then slurry coating is still tacky.
  • Coverage will be 2 -2.2 m2 for the mix of 1 kg of WPL and 1.5 kg of cement

 

Renders & Patch repairing Mortar

  • For render and patching repair mortar application following quantities are to be mix (Cement: 50 kg, Sand: 150 kg, Trubuild WPL: 6-7.5 litres & Water: 10 lit) and this mix can be used as per the requirement.

 

Priming

  • For primer application used for bonding purpose make a slurry of 1:1 ratio (by volume) or 0.3: 1 ratio (by weight) of Trubuild WPL and cement. Apply one coat on surface. The repair or top mortar application should be carried out when then slurry coating is still tacky.

 

Screed & PCC Application

  • For screed & PCC application quantities are to be mix (Cement: 50 kg, Sand: 75 kg, 6 mm gritt: 75 kg, Trubuild WPL: 6-7.5 litres & Water: 10 lit) and this mix can be used as per the requirement.
Storage
Storage

Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.

Shelf Life
Shelf Life

1.5 years (Storage Temp 2-40°C)

Packing
  • Packing

    Bottle:
    200 ml, 500 ml, 1 litre, 5 litre, 10 litre and 20 litre

Application
Handling precautions

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.

X
Enquire Now