Trubuild
Trubuild water repellant is non-flammable water soluble solution designed to incorporate water repellency to varied surface like sand stone, marble, concrete, exposed bricks and terrakota tiles. It is used for water proofing of most of the construction surfaces as it penetrates deeply in the surface and provides excellent water repellency without changing appearance/color of substrate.
- As a sealer for sand stone, concrete & marble surfaces, restore color of terracotta tile
- As sealer for wood to reduce the consumption of paint and clear lacquer
- Brushable and easy to use.Trubuild water repellant is breathable, penetrable and supplied in ready to use form
- Doesn’t stain as well as change appearance and color of substrate Cost effective
- Due to low viscosity penetration in substrate is very high
- Use of trubuild water repellent reduces efflorescence, improve resistance to effects of weathering and seals porous substrates against moisture
- Surface to be treated should be dry and free from all dirt, oil, debris and all other contamination which could prevent penetration
- Apply one coat of Trubuild Water repellent by brush and left the same to dry for next 24 hrs
- Apply second coat wet on wet to improve the penetration and performance and again left the same to dry for next 24 hrs
- Trubuild Water repellent should not be diluted further as it will reduce its effectiveness
- Before applying on natural stone of any new substrate, sampling should be done on a small patch. If this is not done, adverse effects might be observed for a large area
Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
2 years (Storage Temp 2-40°C)
-
Bottle:
1 kg, 5 kg & 20 kg
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastics products”.
