Trubuild APC-225 (Acrylic Polymer Coating) is an acrylic polymer-based coating which is used in conjugation with cement as a coating for waterproofing and bonding application.
Trubuild APC-225 is used as protective coating for concrete structures like sunken portion, toilets, balcony, chajja, basement, terrace, and concrete repairs. It can be used for water retaining structures & general concrete repairs. It can be used for Protection of concrete against corrosion, salt attack etc.
Render & Mortars
|A.||Liquid Sample Properties|
|1||Physical State||Visual||Low Viscous liquid||---|
|3||pH||--||7.6||ASTM E 70|
|4||Specific Gravity||--||1.02||ASTM D 1475|
|5||Solid Content||%||29.1||ASTM D 2697|
|B.||Tests on Mixed Mortar|
|1||Compressive Strength (1:3 Cement sand Mortar with 10% dose of Trubuild APC-225)||N/mm2||32.6||ASTM C 109-21|
|2||Tensile Strength (1:3 Cement sand Mortar with 10% dose of Trubuild APC-225)||N/mm2||2.68||ASTM C 109-21|
|C.||Tests on Mixed Product (Trubuild APC -225: Cement = 1 : 2)|
|1||Slant Shear Strength||Slant Shear Strength||11.2||ASTM C 1042-99|
|2||WFT - 2 Coat||WFT - 2 Coats||375||ISO 2808:2019|
|3||DFT- 2 Coats||DFT- 2 Coats||295||ISO 2808:2019|
|4||Pull off Adhesion||Pull off Adhesion||1.65||ASTM D 7234-2021|
|5||Water Absorption @ 15 min||Water Absorption @ 15 min||Nil||Karsten Tube|
|6||Water Absorption @ 30 min||Water Absorption @ 30 min||Nil|
|7||Water Absorption @ 60 min||Water Absorption @ 60 min||Nil|
|8||Water Absorption @ 4 Hrs||Water Absorption @ 4 Hrs||Nil|
Mixing proportion:2 kg cement: 1kg Trubuild APC 225 Polymer
|Material||Two Coat on concrete kg/m²|
Trubuild APC 225 Brush Topping
|Material||Quantities of Material in Kg for one cubic meter||1 sq.m. of 1.5mm Thickness|
|Trubuild APC 225||430||0.65|
|Fine Silica Sand||860||1.30|
|Total Weight in Kg||2150||3.25|
Product should be stored in a dry place in their original, properly closed containers at temperature between 2 - 40°C. Partially emptied container should be closed immediately.
10 Ltr & 20 Ltr
Precaution and Limitation
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastics products”.