TRUBUILD BWP-222 (Binder & Waterproofer) is an acrylic co-polymer emulsion which is used as bonding agent for new substrate to old substrates and as cement mortar modifier which gives an excellent bond to old and new concrete. If added in concrete, it increases the tensile and flexural strength and life of concrete. If it is mix with cement to make a slurry then it can be used as waterproofing coating.
Steel Priming for reinforcement
Bonding Slurry Coat
Render & Mortars
As Curing agent
|Physical state||Low Viscous Liquid|
|% Solid||IS:101 (P-8/S-6):1993||36-40%|
|Compressive Strength Strength At (1:3::Cement:Sand) With 10% Dosing Into It After 28 Days.||ASTM C 579||30-40 N/mm²|
Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
200 ml, 500 ml, 1 lit ,5 lit,20lit & 50lit
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.