Back

Trubuild

Overview Usage Product Specifications
TRUBUILD PRIMESURE PRIMER

TRUBUILD PRIMESURE PRIMER is single component ready to use water-based primer composed of acrylic emulsion polymer with properly selected fine fillers & additives which gives excellent priming and pores sealing properties and can be used as primer on interior and exterior wall and floors before applying water base waterproofing membranes and coatings to provide excellent waterproofing system.

 

Application
Applications
  • Priming of plastered walls, asbestos, brick, false ceiling, concrete surface, BBC, etc. For any miscellaneous surface contact Technical service team.
Application
Advantages
  • Excellent bonding
  • Excellent Penetration
  • Excellent efflorescence resistance
  • Good weather resistance.
How to use
How to use

Surface Preparation

  • Remove the loose and unsound materials, oil, dirt, debris from the substrate. Remove all the previous waterproofing coatings if any by mechanical means to avoid failure of any subsequent upcoming waterproofing coatings. Fill all the existing cracks up to 5 mm by making “V” groove and then filling it with Trubuild CFP 425. For cracks larger than 5 mm use Polymer modified mortar making with Trubuild WPL 333/Trubuild BWP 222 after making v groove, repair all the patches and joints with Trubuild Non-shrink grout HS and make substrate sound.

 

Application

  • Before application of Trubuild Primesure Primer on the substrate, it is to be ensured that the surface should be in Saturated Dry Condition(SSD) and use air blower for removal of any dust due to wind(Don’t use Hot blower). Filling the pores and making suitable surface for further waterproofing, use Trubuild Primesure primer in diluted form with water in 2:1 chemical to water ratio(50% water dilution), by weight before commencement of any finish coat.

 

 

TECHNICAL DETAILS

 

PROPERTIES STANDARD RESULTS
Colour - White
Solid content % ASTM D 1644-01 48±2
Bonding strength ASTM D 4541:2017 Excellent
Efflorescence resistance SS500:2015 Good
Weather resistance ASTM G 154:2016 Good
Tensile strength N/mm² ASTM D 412-2016 ≥2
Density gm/cc ASTM D 1475-13 1.28±0.02
Shelf Life
Shelf Life

36 months (Storage Temp 2°C - 40°C)

Storage
Storage

Product should be stored in a dry place in their original, properly closed containers at temperature between 2°C-40°C. Partially emptied container should be closed immediately.

Packing
  • Packing

    Bottle:
    1 Ltr, 4 Ltr & 20 Ltr

X
Enquire Now