TRUBUILD WPC 666 (Waterproofing compound) is a single component elastomeric Acrylic based exterior protective coating to be applied over exterior surface of walls, sloppy roofs, corrugated sheets& terrace for non-trafficable area to prevent entry of water and moisture from the surface
NOTE: Please check the compatibility before applying on the substrate apart from masonry or concrete. Also, before doing any ponding test the coating should be air cured for min. 7 days. In case of excess moisture in substrate, there is chance of blister formation in coating. It is always advisable to check coverage on small surface area on site, before working on larger area.
|Physical state||Visual||Low Viscous liquid|
|Colour||Visual||White (Dry cement colour can also be added to make desired shades)|
|Viscosity @25°C||12000 – 14000 cps|
|Drying Time||IS:101 (P-3/S-1):1986||40 min (Complete curing in 7-10 days)|
|Solid Content%||54 ± 2%|
|Coverage||7-8 sq meter/kg (Brush Application, single coat)|
|DFT Per 2 Coats||Visual||120 Micron (depends up on porosity of the Substrate)|
|Elongation % Adhesion to Concrete||ASTMD 638||Min 250% Min 1N/mm²|
|Tensile Strength (N/mm2)||ASTMD 638||1.1 MPA|
|Water Vapour Transmission||ASTM -D96||PASS|
|Water Permeability (mm)||EN-12390 Part 8||NIL|
18 months from the date of manufacturing.
Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
250 gm, 500 gm, 1 kg, 5 kg & 20 kg
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastics products”.