Back

Trubuild

Overview Usage Product Specifications Handling Precautions
TRUBUILD CPS 111

Concrete Porosity Sealer

 

TRUBUILD CPS 111 (Concrete Porosity Sealer) is an integral water proofing compound which is special designed for giving water proofing to cement concrete, mortars & plasters. It gives cohesive property to cement which ultimately gives water proofing and also protect the reinforced steel against corrosion.

Meets the requirement of IS: 4031-1988 & IS: 6925-1973 & IS: 2645-2003

Application
Applications

Trubuild CPS is used for water proofing of cement-sand mortar used for making roof slabs, bathrooms, drains, basements, water tanks etc.

Application
Advantages
  • Reduces the permeability of water to the concrete hence giving excellent water proofing and along with this protecting reinforced steel bars against corrosion
  • Single component product and easy to use due to its low viscosity
  • It improves workability of freshly mixed concrete and increases durability of concrete without affecting the strength of concrete
How to use
How to use
  • Mix cement, aggregates its mixture in dry state and then discharge Trubuild CPS 111 in water as per cement used in dry mix. Then pour the mixed water into the dry mix and mix it till we get homogeneous mixture, then use it as per requirements.
  • Mix Trubuild CPS 111 as per the recommended dosage and then again mix for 3 min and now use the mixture as per the requirement
  • Cure the applied mortar or concrete as per good construction practices

 

TECHNICAL DETAILS

 

PROPERTIES STANDARD RESULTS
Physical state   Low Viscous Liquid
Appearance   Transparent
Colour   wine-red
pH   >9
Specific Gravity   1.03-1.05
Setting Time IS: 2645: 2003 30-600 min
Water permeability IS: 2645: 2003 Pass
Compressive Strength IS: 2645: 2003 As per the standard
Usage Restriction
Restriction of usage
  • Trubuild CPS 111 should be use in recommended dosage
  • Do not directly mix Trubuild CPS 111 directly to cement
  • Make sure that water-cement ratio should be lowest
Shelf Life
Shelf Life

24 months (Storage Temp 2-40°C)

Storage
Storage

Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.

Shelf Life
Dosage

200 ml per 50 kg bag of cement.

Packing
  • Packing

    Bottle:
    200 ml, 500 ml, 1 lit, 5 lit, 10 lit, 20 lit, 50 lit & 200 lit

Application
Handling precautions

Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastics products”.

X
Enquire Now