Bondtite Wood Adhesives

• Bonds laminate, plywood and other hard /soft wood, veneer, particle board, MDF, block board, hard board, etc
• Specially made for the handicraft industry and bonds all types of wood and ply to laminate, mainly in areas where furniture is affected by moisture/water like kitchens, bathrooms, etc.

• Easy to apply by brush, spatula or glue roller.
• Excellent water-resistant properties.
• Handling strength within 2.0 to 3 hr. prior to cutting & trimming.
• Does not contain free formaldehyde
• It is non-toxic and non-flammable adhesive.

• The surfaces to be bonded should be free from dust, oil and grease. They should be dry and properly leveled.
• For best results, roughen the surfaces to be bonded.
• Stir contents of the container before use.
• Apply an even coat of EDGE-D3 first on comparatively non-porous surfaces and then on porous surfaces, for e.g. apply first on laminate and then on wood.
• Excellent flow and spreadibility that can give higher coverage.
• If possible, application should be lengthwise on one surface and breadth wise on the other surface. This will help in proper and uniform spreading of adhesive while pressing.
• For ply to laminate: Before allowing adhesive to dry, bring both surfaces in contact, align properly and start.Pressing from one side by using wet squeezed cloth to avoid bubbles, and ensure uniform contact.
• For Wood To Wood: Before allowing adhesive to dry, bring both the surfaces in contact and align properly To get best results keep them pressed for 24 hours.
• Excess adhesive that oozes out from edges should be wiped off with a wet squeezed cloth.
• Pressure can be applied by using nails, clamps, weight, Resitape, Cold Press, Hot Press, Roller Press, etc.

9 months from date of manufacturing in a sealed pack.