Overview Usage Product Specifications Handling Precautions

VEGACOL is a poly vinyl acetate based adhesive compounded by proprietary additives. It is mainly used as general purpose adhesive in furniture industry, Laminate pasting, handicraft, packaging, paper tube, etc.

  • Laminates, plywood and other hard /soft wood, veneer.
  • Particle board, MDF, block board; hard board, etc.
  • It is specially made for the handicraft industry and furniture where economical cost concern
How to use
How to use
  • The surfaces to be bonded should free of dust, oil, grease and must be dry and properly levelled.
  • For best results, roughen the surfaces to be bonded and stir contents of the container before use.It is a ready to use product so dilution is not recommended.
  • Apply a thin coat of VEGACOL on both surfaces then allowed to dry for 5-7 minutes.
  • Then bring both the surfaces in contact and align properly. Then keep them pressed for 24 hours for best result.
  • Excess adhesive that oozes out from edges should be wiped off with a wet squeezed cloth. Pressure can be applied by using nails, clamps, weight, paper tape
  • If required, pressure can be released after 6 to 8 hours and the bonded


Technical Details


Properties Standard Results
Physical state   Viscous Liquid
Appearance   Opaque
Color   White
Viscosity(in CPS) @30°C ASTM D 2196-05 50-90 poise
Specific Gravity @25°C ASTM D 1475 1.05-1.07
pH   5-5.5
% Solid @ 105-120°C/2H IS 3447:1993 36-40
Drying Time (Sec.)   450-500 @ 75μ at 25°C
Tensile StrengtH (kg/cm²) ASTM D 1002-10 35-40
Shelf Life
Shelf Life

18 months from date of manufacturing

  • Packing

    1 Kg, 2 Kg, 5 Kg, 10 kg, 20 kg & 50 Kg


Handling precautions

Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.

Enquire Now