Zesta

• For bonding in all type of woodworking like plywood, wood, laminates, veneers, particleboard, block board/hard board, MDF to each other.
• Furniture, handicraft, sports goods, packaging & book binding, paper labelling, paper tube, wall paper, carpet manufacturing.
• Also recommended for bonding any two material where at lese one of them is porous eg. Paper, cardboard, particleboard etc. and other related applications.

• Single component ready to use
• Economical in long run
• Unsurpassed bonding strength
• Resistance to water and heat
• Gives higher coverage
• Eco-friendly with low odour
• Good spread ability

ZESTA WR is having a very good spreadability can be apply with the help of Astral Adhesive Resiwood applicator or by brush, roller or fingers. The usual procedure to be follow is:

• Clean both the surfaces to be bonded.
• It is ready to use product so dilution is not recommended.
• Apply a thin ZESTA WR on both or one surface – as per requirement and spread evenly in 5-7 minutes.
• Press the two surfaces together and keep under pressure with the help of either clamp, nails, wooden support etc., till the adhesive drives completely. Excess adhesive pressed outside the joints should be wipe out with a wet cloth.

12 months from date of manufacturing in a sealed pack.