Back

Bondtite SR Adhesives

Overview Usage Product Specifications Handling Precautions
Bondtite Quik Spray

Bondtite Quik Spray is a sprayable rubber based adhesive for permanent bonding of materials where immediate bond strength and high heat resistance are required.

Application
Applications

Bondtite Quik Spray is mainly use for following applications.

 

  • It can bond Laminate to Plywood in seconds.
  • It can be applied on areas like ceiling, inside of wardrobes and areas where otherwise difficult to apply the adhesive.
  • It can bond foam, metal, wood etc with each other Also, can be used by carpenters as an instant, bonding tool.
Application
Advantages
  • High Initial Strength
  • Fast Tack
  • High Temperature Resistance
  • Low Odour
  • Low VOC
How to use
How to use
  • Shake the can well. Ensure surfaces are clean and free from contaminants. Hold the can 10 cm away at a 90degree angle to the surface.
  • Spray evenly on surface with a 50% overlap for full coverage. Leave surfaces for 1-2 minutes, or until dry to touch.
  • Place surfaces together and apply even pressure to solidify bond, a roller is recommended to do this.

 

Technical Details

 

Viscosity 180 cps 25°C
Sheer > 250 p.s.i
Shear adhesion failure temp. (SAFT) 100gram> 126°
Dry time 3-5 mins
Open time 1 Hour

 

Formaldehyde Free

 


*(Tack retention time (open time) is generally measured after evaporation of solvent once adhesive applied in thin film. It may vary depending upon ambient temperature and humid conditions.)

Shelf Life
Shelf Life

12 months in a partially filled packing and strictly store in cool, away from heat.

Packing
  • Packing

    Tin Can:
    500 ml(405 gm)

Application
Handling precautions

Consult Material Safety Data Sheet prior to use.

 

  • Do not store at temperatures over 50°C.
  • Avoid exposure to direct sunlight.
  • Do not store directly on concrete floor. Always store above 15°C
  • When connected, keep valve open and hose pressurised at all times
  • Always test our adhesives to determine suitability for your particular application prior to use in production
X
Enquire Now