Astral AQUASHIELD is a specialized polymer-based wood coating designed for protecting plywood or wooden surfaces against water seepage and dampness causing damage to furniture.
Used to resist effect of moisture, seepage and humid areas
Cost saving
Eco-friendly
Saves time
Astral Aquashield can be used for application over backsides of wardrobes, shelves, cupboards and furniture surfaces which may expose to direct contact with walls.
Step 1 : Remove dust , dirt, oil and grease etc. present on the plywood surface .
Step 2 : Stir material thoroughly before each use.
Step 3 : Apply 1 st coat of Bondtite Aquashield using brush or roller on whole plywood surface evenly and leave it for 10-15 minutes to dry.
Step 4 : Apply 2 nd coat over 1st coat similarly as done earlier.
Step 5 : For highly porous surface 3rd coat can be applied .
Step 6 : After application is completed , clean the brush and other tools with normal water.
Imparts waterproof property
DIY application
No odour
Ready-to-use
Benzene-free
Aquashield Wood Coating is a specialised polymer-based wood coating that forms a water-resistant layer on plywood, protecting it from dampness and water seepage.
Aquashield Wood Coating is suitable for plywood, wooden furniture, doors, windows, cabinets, and other interior and exterior wooden surfaces that require a durable protective coating.
Remove dust, dirt, oil and grease from the plywood surface, stir the material thoroughly, then apply a first coat evenly with a brush or roller, let it dry 10-15 minutes, and apply a second coat over the first.
Each coat of Aquashield Wood Coating should be left to dry for 10-15 minutes before the next coat is applied, with a third coat recommended for highly porous surfaces.
Aquashield Wood Coating is commonly applied to the backsides of wardrobes, shelves and cupboards that are in direct contact with walls, to prevent moisture damage.
Yes, Aquashield Wood Coating forms a water-resistant layer that protects plywood and wooden furniture surfaces from water seepage and dampness.
Aquashield Wood Coating is intended for plywood and wooden furniture surfaces and is not designed as a structural adhesive for bonding two substrates together.
Avoid applying coats without stirring the material first, skipping the drying time between coats, or applying only one coat on highly porous surfaces that need extra coverage.
Aquashield Wood Coating is specifically engineered as a protective water-resistant layer for plywood and furniture, a function ordinary adhesives are not designed to perform.
Store Aquashield Wood Coating in a dry place in its original, properly closed container at temperatures between 2-40°C.
Shelf Life: Up to 1 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Easy to apply
Increases furniture lifespan
Protects against seepage
