BONDTITE EDGE D3 is a premium woodworking adhesive specially designed with cross-linked polymer technology for excellent moisture and water resistance. It conforms to requirements of European (EN) 204-D3 Standards. It is designed for laminate pasting in furniture industry through hot press, cold press and several other applications. It is specially developed for the furniture of areas like kitchens, bathrooms, etc. which is affected by moisture/water.
It is suitable for bonding wood-to-wood in joineries, plywood-laminate bonding in mechanized units. Suitable for application of furniture exposed to high moisture areas.
Bondtite Edge D3 has very good spreadability and can be applied with the help of the Astral Adhesive's Bondtite applicator as per below mentioned procedure :-
Step 1 : The surfaces to be bonded should be free from dust, oil and grease. They should be dry and properly levelled.
Step 2 : Stir contents of the container before use. It is ready to use product so dilution is not recommended.
Step 3 : Apply an even coat of Bondtite Edge D3 first on comparatively non-porous surfaces and then on porous surfaces, for e.g. apply first on laminate and then on Plywood.
Step 4 : For plywood to laminate: Before allowing adhesive to dry, bring both surfaces in contact, align properly and start pressing from one end to another end by using wet cloth. This ensures uniform contact to avoid bubbles. For Wood To Wood: Before allowing adhesive to dry, bring both the surfaces in contact and align properly. To get best results keep them pressed for 24 hours.
Step 5 : Press the two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support etc., till the adhesive dries completely.
Step 6 : Excess adhesive pressed outside the joints should be wiped out with a wet cloth.
Step 7 : Pressure can be applied by using nails, clamps, weight, Resitape, Cold Press, Hot Press, Roller Press, etc.
Fast-setting
Low odour
Confirms EN204 to category D3
Easy for application - roller and spreader
Bondtite Edge D3 is a wood adhesive used for laminate pasting and hard and Soft wood-to- wood bonding in handicraft and furniture manufacturing indusrty .
It bonds wood, plywood and laminate substrates, and is suited to bonding through, Manual Clamp, HF, hot press, and cold press , other furniture processes.
Apply an even coat first to the non-porous surface, then the porous surface, bring them together while wet, and press for 24 hours.
Bondtite Edge D3 is fast-setting, and parts should be kept under pressure until the adhesive dries completely for best results.
It is commonly used for wood-to-wood joinery,plywood-to-laminate bonding and especially in furniture for moisture-prone areas like kitchens and bathrooms.
Bondtite Edge D3 has excellent waterproof properties and meets European EN 204-D3 standards; specific heat-resistance figures are not listed.
Avoid using Bondtite Edge D3 on surfaces with dust, oil or grease, as the substrate must be dry and properly levelled.
Common mistakes include not pressing the surfaces evenly during bonding and failing to wipe excess adhesive from the joints before it dries.
Bondtite Edge D3 is formaldehyde-free, fast-setting, low odour, and provides excellent coverage for moisture-resistant furniture applications.
Store Bondtite Edge D3 in a dry place in its original, sealed container at 2-40°C, and reseal partially used containers or pouches immediately.
Shelf Life: Up to 1 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Fast-Settings
Formaldehyde Free