Step 1 : Surfaces must be clean, dry and free from oil, wax or other contamination.
Step 2 : Mix resin and hardener for one minute thoroughly and then apply on bangle or handicraft substrates as per regular methods of application.
Step 3 : Allow a coating surface to be dried and sticky for bonding of chaton and stones as per requirement.
Step 4 : Allow coating to dry for 24 hrs for optimum bonding strength.
Slow drying
Good adhesion strength
Shelf Life: 2 years from date of mfg. (Storage Temp 2-40°C)
Storage: Product should be stored in a dry place in their original, properly closed containers at temperature between 2-40°C. Partially emptied container should be closed immediately.
