BONDTITE HEATBOND is a solvent-borne synthetic rubber-based adhesive formulated with a special feature providing excellent heat resistance up to 180° C. It also possesses quick grab property and strong bonding efficiency - ideal for application of vertical laminates.
Suitable for applications at heat prone areas - up to 180° C
High coverage to save cost
Best for bonding laminate over vertical and curved surfaces where faster bonding is required
Plywood to laminate
Leather articles
Bus body and automotive interiors
The usual procedure to be followed for application of Bondtite Heatbond with the help of Astral Adhesive's Bondtite applicator is as follows :
Step 1 : Surface preparation: Ensure that substrates to be bonded are clean, dry and free from oil, grease and foreign particles such as dust and rust.
Step 2 : Stir adhesive well and make it homogeneous prior to use.
Step 3 : Apply adhesive uniformly in thin layer on both the substrates to be bonded with Bondtite applicator or any suitable tool.
Step 4 : Allow evaporation of solvents from adhesive layer to develop tack.
Step 5 : The evaporation of solvent may take 5 to 10 minutes depending on ambient temperature and humidity.
Step 6 : Assemble both the substrates with uniform contact pressure to achieve intimate contact without air pockets. The optimum bond strength will be achieved after 24 hours.
Fast-setting
High strength
Excellent heat resistance
Superior spreadability
Shelf Life: Up to 1.5 Years
Storage: Products should be stored in a dry place in their original, properly closed containers at temperatures between 2-40°C. Partially emptied containers / Pouches should be closed immediately.
Laminate Pasting Specialist
Superfast setting
Withstandsup To 180°c
