ResiBond
Resibond Neutral 3010 is one part neutral cure silicone sealant which cures to a tough rubbery solid when exposed to moisture in the air. It has excellent resistance to weathering, UV light, moisture, ozone, vibration & extreme temperature. Long life reliability cured sealant stays rubbery from -60 to 200ºC without tearing, cracking, drying out or becoming brittle. Available in translucent, black & white color. Resibond MP 3010 will not flow under its own weight. It can therefore, be applied overhead or on vertical joints and surfaces without slumming, sagging or running out.
Resibond Neutral 3010 sealant can be used for all interior and exterior sealing requirements involving steel sheet, aluminum roofing, flashing guttering and rain water accessories, as well as ducting and many other complicated application. Resibond MP 3010 sealant provides an excellent anti-corrosion barrier between dissimilar metals such as aluminum and steel where electrolytic corrosion can be severe problem.
- Surfaces must be clean, dry & free from grease and detergents
- Mask adjacent surfaces for neat application
- Cut tip of cartridge, cut nozzle to desired size at 45° angle, attach to cartridge, and place in caulking gun
- Apply sealant in continuous, steady flow. Push sealant ahead of nozzle contacting both sides of joint so it is completely filled
- Smooth sealant surface immediately after application before skin forms. Use spatula dipped in mild detergent. Remove masking tape before sealant skins
- Excess uncured sealant should be removed immediately with clean cloth damped in mineral turpentine
- When sealing a metal lap joint, apply sealant to one surface in a continuous bead through the line of intended fasteners and fasten immediately, if no fasteners are to be used ensure sufficient sealant is used and joint supported while sealant cures
12 months in unopened packaging in a dry and cool storage place, at temperatures between +5°C and +25°C.
Product should be stored in a dry place in their original, properly closed containers at temperature between 2 - 40°C.
-
Plastic Cartridge:
280 ml -
Aluminum Tube:
4 ml, 10 ml, 15 ml, 20 ml, 25 ml, 50 ml, 85 ml & 100 ml
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product data sheets and the brochure “Hygienic precautions for handling plastic products”.
