Sealing overhead tanks, wash-basins, metal bucket etc.
Fixing window glass on Aluminum frame and nails on wall
Repairing of corroded parts of air conditioners, freezers, radiators, etc.
Repairing of kitchen appliances
Step 1 : The surface should be free from dust, rust, oil, paint, varnish, moisture etc. Emery paper or grinder can be used to abrade the surface for better binding. Acetone, petrol, kerosene oil can be used to free the surface from grease/oil
Step 2 : Twist or cut off required amounts, then knead it with fingers to achieve a uniform color. If mixing is difficult, warm the putty to room temperature or slightly above. Apply to surface to be repaired within 2 minutes of mixing. Force into any cracks or holes to be filled and strike off the excess material, preferably with a tool that’s made moist using clean water.
Step 3 : When applying to a damp or wet leaking area, work the material forcefully and apply pressure until adhesion begins to take effect. For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening. Remove excess material before hardening begins.
Step 4 : After 5-10 minutes the epoxy will begin to form a tenacious bond. After just 60 mins, Bondset Sanitary Under Water can be drilled, sawed, carved, sanded, stained or painted
Bright white in color
Low shrinkage
Paintable
Bondset White Epoxy Putty is a hand-kneadable, multipurpose epoxy-based white putty supplied as two sticks of resin and hardener, used for filling, sealing and repair work.
Bondset White Epoxy Putty can be used to repair and seal a range of substrates in handicraft, electrical, mechanical and civil engineering applications.
Clean the surface of dust, rust, oil and moisture, knead the putty until it has a uniform colour, apply within 2 minutes of mixing, and strike off excess material with a water-moistened tool.
Bondset White Epoxy Putty begins forming a tenacious bond within 5-10 minutes, and after 60 minutes it can be drilled, sawed, carved, sanded, stained or painted.
Bondset White Epoxy Putty is commonly used for sealing overhead tanks and wash basins, fixing window glass on aluminium frames, and repairing corroded parts of air conditioners, freezers and radiators.
Bondset White Epoxy Putty is designed for sealing and repair applications including tanks and basins, indicating good resistance to moisture once cured.
Surfaces with dust, rust, oil, paint or moisture should be cleaned and abraded with emery paper or a grinder first for Bondset White Epoxy Putty to bond properly.
Avoid applying the putty more than 2 minutes after mixing, skipping surface cleaning, or warming the putty excessively if mixing feels difficult.
Bondset White Epoxy Putty meets handicraft, electrical, mechanical and civil engineering repair requirements with a white finish that ordinary adhesives are not formulated to provide.
Store Bondset White Epoxy Putty in a dry place in its original, properly closed packaging away from heat and moisture.
Shelf Life: 12 months from date of manufacturing
Storage: Product should be stored be stored below 40°C in a cool and dry place away from sunlight in properly tight container.
It is in bright white colour
Soft pliable and easy to mix
Suitable for handicrafts application
